Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns Buys

Hello Website visitors. Are you searching for Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns? This is very popular product and also bestseller on our website right now! Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns is high quality products from vendor. Following my long search I determined that at our site is cheapest and guaranteed shipping as well. Normally ships with 24 hours.

If you are seeking Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns

Price: Click Here
Technical Information: Click Here

Features 16x25x5 MERV 8 Carrier Replacement Filter (2 Pack) Buys

• Reduces fine sediment and chlorine taste and odor in residential and commercial drinking water
• Nominal filtration rating of 5 microns
• Bonded PAC media with polyolefin pre-filter and polyethylene netting for extended life
• Initial pressure drop of 4.3 psi at a flow rate of 2 gpm
• Temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C)

Related Products Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns Buy

Related Products

• Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"
• Pentek, Pentair Water 151122 Big Blue O-Ring Buna-N ORing
• Pentek 150469 3/4" #10 Big Blue Filter Housing
• Culligan RFC-BBSA Level 4 Heavy Duty Sediment Replacement Cartridge
• Pentek 150296 SW-3 Wrench for #10 Big Blue Housings

Do not miss! They offer the best Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns for sale now with special price for today. We offer you the best deal for online Sh0pping in USA. You buy Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns now get fast delivery directly from amaz0n.

Read Buy and Guide On STORE

Product Description

This Pentek EPM-BB carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in up to 22,000 gallons at a flow rate of 2 gallons per minute (gpm). This cartridge is made of bonded powdered activated carbon (PAC) filter media wrapped in a polyolefin pre-filter with polyethylene outer netting. The nitrile butadiene rubber (Buna-N) gaskets seal the cartridge against the housing (sold separately). The cartridge has an initial pressure drop of 4.3 pounds per square inch (psi) at a flow rate of 2 gallons per minute (gpm), and operates over a temperature range of 40 to 180 degrees F (4.4 to 82.2 degrees C). This carbon block filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for purification of residential and commercial drinking water.

SpecificationsNominal filtration rating5 micronsInitial pressure drop at 2 gpm4.3 psiChlorine reduction capacity22,000 gallons at 2 gpmTemperature range40 to 180 degrees F (4.4 to 82.2 degrees C)Maximum dimensions (H x W)9-3/4 x 4-5/8 inches (248 x 118 mm)Materials certificationNSF/ANSI standard 42

The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 90%.

H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced. Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.

Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.

GO TO MAIN STORE   CUSTOMER REVIEW

Tag : Pentek S1-BB Pleated Filter (9-3/4" x 4-1/2"), 20 Micron: ... The Pentek S1-BB Sediment Water Filter Cartridge is a low-cost, pleated cellulose filter, and is great for whole house filtration. It offers great value while ...

You're reading an article about Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns Buys and you can find articles Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns Buys this with the url http://filtrationreplacementa215.blogspot.com/2013/08/pentek-ep-bb-carbon-block-filter.html, you should share it or copying and pasting it if the article Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns Buys This is very beneficial to your friends, but do not forget to put the link Pentek EP-BB Carbon Block Filter Cartridge, 9-3/4" x 4-5/8", 5 Microns Buys source.